YD228B point glue machines, sophisticated aesthetic appearance can be placed on the dispenser to save space, the point of control glue machines digital form, can be a very intuitive control over their capacity of plastic. Applicable to all kinds of pneumatic industrial fluid dispensing applications. A dilution fluid used to control the vacuum to suction function, a regular mode of operation and continuous operation mode; a plastic fast, one will be used to operate as simple as that.
     Scope of application:
     YD228B point the sound of the machine for vinyl glue, paints, lubricants, solder paste, silver paste, ink, mud oil resistance SWT, red rubber, silicone, UV glue, fast rubber, chemical test relief,水晶胶, Central oxygen resin, yellow plastic, glass plastic,散热膏, plastic horn, plastic wear, plastic screws, electrolyte, magnetic fluid, flux, alcohol, markers, paint, water, silicone
     Applicable products:
     Automotive electrical household appliances bearing the circuit board packaging electronic components camera pharmaceutical production process of electrical components capacitor relay processing machines jewelry quartz crystal lighting circuit wire connector radio equipment
     Features:
     1, with high-pressure air in the set period of time, use the foot pedal or automatic launch of the liquid.
     2, there is little, and even moving, timing Epoxy function; drip directly trigger Epoxy footswitch, and control by the time the volume of precision dispensing; is linked with their feet on the pedals to control the closing time of Epoxy long time; Epoxy is triggered from time to time through the time control switch Epoxy
     3, the use of high-precision digital timing controller, precise control of each titration time, accurate to the millisecond, the right to control the liquid flow, liquid waste materials will not be.
     4, as long as good air conditioning, time and select the appropriate needle Tsui, each Note will be easy to change the drop time and drop note. Epoxy solve many problems, the use of simple, fast and easy-to-use operation,
     5, equipped with a vacuum to suction function, anti-reflux system vacuum; syringes with liquid so that does not automatically drop out or back, can control the viscosity of different liquids, to prevent leakage drop, high efficiency, a plastic consistency. Fatigue is not easy, no waste, uses a wide range of products is complete,
     6, can be based on user needs, with different sizes of syringes, needles Tsui is the best partner users.
     Parameters:
     Power: AC 220V ± 10% / 50Hz Power consumption:
     Air Source: Max 0.99MPa (clean dry air without lubrication)
     Out the pressure adjustment range: 0.05MPa-0.7MPa
     Out the time range: 0.01S--30S, adjustable DIP switch combination of programs,
     Time mode features a variety of modes: manual mode / automatic mode of the vacuum to suction functions:
     Out the frequency accuracy: ± 0.05% Frequency: 600 times / min
     Out the volume of the smallest: 0.01ml
     Dimensions: 270mmx165mmx140mm
     Weight: 2.2kg